New Porsche 911 CS Correction.
I got a call from my customer telling me he just got a new 911 CS and asked me to take a look at it, I guess to my surprise I got a pretty swirled/hologram imperfect new 911! It always surprises me that dealers selling cars can do this, I feel its the dealers’ job to present a perfectly prepped new car to a customer in fact they should do this for pre-owned cars as well.
Enough ranting, here is the write up.
What was done –
Exterior
– Wheels were prepped with Sonax Wheel Cleaner and cleaned up with various brushes
– Tires were spritzed down with P21S Total Autowash and washed down
– Wheel wells were spritzed down with P21S Total Autowash
– Wash down and rinsed
– Door jambs were cleaned up
– Clayed
– Dried
– Paint inspected and measured
– Wheel Wells were cleaned and dressed
– Tires dressed
– Masking
– 3 Step Paint correction (Meguiars M105 with an Uber Yellow, Menzerna Super Intensive Polish with an Uber Green and Menzerna PO85RD with an Uber Blue)
– Inspection with Fenix, 3m Sun Gun, Infratech, and natural sunlight
– Last Step – Menzerna Power Lock
– Rubber and Plastics Treated
– Exterior windows and mirrors cleaned and sealed
– Exhaust tips cleaned
– Engine Cleaned up and dressed
Products used:
(feel free to click the link below for more info)
Exterior:
Lusso Auto Bathe
P21S Total Auto Wash
Uber Yellow Wash Sponge
Uber Clay Bar kit with Optimum No Rinse
Einszett Spray Wax
Meguiars M105
Menzerna Super Intensive Polish
Menzerna PO85RD
Menzerna Power Lock
Wheels/Tires
Sonax Wheel Cleaner
Swissvax Pneu
Glass
Adam’s Glass Cleaner
Adam’s Glass Sealant
Tools:
Infratech 5300
Fenix TK11
Brinkmann
Fenix TK40
Flex 3403
Makita
Metabo
The Uber Foam Pads (5.5inch)
Tons of “Uber” Microfiber Towels
Uber Drying Towels
Brushes
Cam Spray Pressure Wash and Foam Canon Attachment
Before
The paint imperfections!
Closer
Dirty wheels
Sonax in action
Clean wheels
Before shots of the engine
Cleaned up
Einszett Vinyl Rubber Care was used to dressed the engine
After shot of the engine
Sorry no foam actions shots
Clay
Masking
Paint Depth Measurements
Corrections shots (50/50)
Rear fender (50/50)
After
Final Rinse before Power Lock
Menzerna Power Lock
Power Lock was applied using a Porter Cable 7424XP
Removing Power Lock
Before exhaust tips
After tips where cleaned up
Swissvax Autobahn on the wheels
After shots
(Permission for the write up granted by the customer)
Phil what a great job that you did!
I really appreciate it! The swirl marks were killing me!
Owner of this car.